Can a population keep growing when food is limited?
Run the experiment on this page ↓
Short answer (general ecology)
No population can grow without limit when its food is finite. As numbers rise, each individual gets less, so births fall or deaths rise and growth slows. How many a place can support depends on how fast the food is renewed, and populations often overshoot and fluctuate rather than settle smoothly.
What you can do here
Compare two worlds that contain only grass and herbivores. In one, grass regrowth is cut to 50% at a set time. See how many herbivores each world supports, and how the count moves around that level.
Limit
This is an abstract educational model. It does not forecast what would happen in any real ecosystem.
Run the experiment
- Predict
- Watch one run
- Compare 5 runs
- Read the result
After grass regrowth is cut in B, how do you think its herbivore count will compare with A?
You can start without choosing. Your choice is not sent anywhere.
Watch one run
tick 0 / 0Preparing the world…
A: nothing changed
B: grass regrowth cut to 50%
| A | B | |
|---|---|---|
| Herbivores | ||
| Grass |
Keyboard, while the focus is in this panel: Space plays and pauses, → advances one step, R restarts, 1 and 2 show A and B.
Selected individual
Click or tap an individual in either world to see its values here. The button under each world selects one without a pointer.
What the shapes and colours mean
Ground colour = amount of grass
The amount of grass is shown in three steps: the colour of soil where there is almost none, light green where there is grass, and deeper green where it is thick.
Dullness and thinness = reserves
As reserves run low, the body turns duller and thinner. An individual whose reserves run out dies.
Size = growth
Newborn individuals are drawn small and grow to adult size.
Compare repeated runs
One run can differ from the next by chance. The same comparison is repeated with different random seeds to see how consistent the difference is.
Try it: change a condition and compare again
Write down what you expect first. The random seeds stay the same, so a difference from the standard result comes from the setting you changed.
How much grass grows back on each tile at every tick, in both worlds. Standard: 8. Range: 1 to 40.
As a share of the regrowth before the intervention. 100% means nothing changes. Standard: 50%. Range: 10% to 200%.
With these values, grass regrows 8 per tick in A, and 4 per tick in B after the intervention. When it does not divide evenly, B is rounded down to a whole number.
Saved results
Results are stored only inside this browser and are never sent to a server. What is stored is the settings, the random seeds and the summary numbers for each replicate; the tick-by-tick record is not stored, because the same settings always reproduce the same result. Up to 50 results are kept across all experiments and the free lab, and the oldest are removed beyond that. They do not carry over to another browser or device: use a share link to move one. Deleting cannot be undone.
Move saved items to another browser
Everything saved here (all experiments and the free lab) can be written to one file. Load that file in another browser or device and the same items are listed there. Loaded results use the numbers in the file as they are; run the settings again if you want to check them. The file stays on your device and is not sent anywhere.
Reference result (20 replicates)
These values were computed in advance with the same engine that runs in your browser. Running the same settings and seeds yourself gives exactly the same numbers.
A and B compared
| Measure | Result |
|---|---|
| Herbivore count (mean over the observation window) | B was lower in all 20 replicates (median A 369, B 181). |
| Grass (mean over the observation window, as a share of the maximum) | B was lower in all 20 replicates (median A 24%, B 12%). |
| Herbivores that starved (after the intervention) | B was lower in all 20 replicates (median A 1,848, B 922). |
Observed What was measured in these runs.Reading How the measurements can be read, given the rules of this model.
- ObservedIn 20 of 20 replicates, B (grass regrowth set to 50%) had fewer herbivores than A (mean over the observation window).
- ObservedComparing medians, B was 49% of A (A 369, B 181).
- ObservedDuring the observation window the herbivore count did not settle at one value; it moved up and down around its mean (median coefficient of variation: A 5.4%, B 6.3%).
- ReadingIn a model that moves individuals one by one, the count does not have to follow a smooth S-shaped curve.
Engine version 0.1.0, 20 replicate(s) with seed(s) 101–120. Observation window: ticks 1,400–2,400. These are observations from this model with these settings, not predictions about real ecosystems.
Charts
Show as a table
| Tick | A median | A range | B median | B range |
|---|---|---|---|---|
| 0 | 168 | 168–168 | 168 | 168–168 |
| 300 | 359 | 330–372 | 359 | 330–372 |
| 600 | 359 | 328–407 | 359 | 328–407 |
| 648 | 379 | 331–446 | 329 | 299–413 |
| 696 | 378 | 336–435 | 212 | 178–250 |
| 804 | 365 | 322–439 | 160 | 141–176 |
| 900 | 357 | 336–423 | 184 | 154–205 |
| 1,200 | 367 | 347–410 | 188 | 164–203 |
| 1,500 | 363 | 320–387 | 181 | 166–195 |
| 1,800 | 358 | 319–420 | 182 | 162–202 |
| 2,100 | 364 | 324–399 | 182 | 155–202 |
| 2,400 | 366 | 333–430 | 183 | 165–222 |
Show as a table
| Tick | A median | A range | B median | B range |
|---|---|---|---|---|
| 0 | 60% | 60%–60% | 60% | 60%–60% |
| 300 | 28% | 23%–30% | 28% | 23%–30% |
| 600 | 26% | 21%–33% | 26% | 21%–33% |
| 648 | 25% | 20%–34% | 12% | 9%–17% |
| 696 | 24% | 21%–34% | 9% | 7%–11% |
| 804 | 23% | 21%–32% | 12% | 10%–15% |
| 900 | 24% | 20%–31% | 13% | 11%–17% |
| 1,200 | 24% | 19%–30% | 12% | 11%–16% |
| 1,500 | 25% | 21%–32% | 12% | 10%–15% |
| 1,800 | 25% | 20%–29% | 12% | 8%–16% |
| 2,100 | 24% | 22%–29% | 12% | 10%–19% |
| 2,400 | 25% | 22%–38% | 12% | 10%–14% |
Show as a table
| Tick | A median | A range | B median | B range |
|---|---|---|---|---|
| 0 | 0.0 | 0.0–0.0 | 0.0 | 0.0–0.0 |
| 300 | 0.3 | 0.0–1.2 | 0.3 | 0.0–1.2 |
| 600 | 0.8 | 0.3–2.3 | 0.8 | 0.3–2.3 |
| 648 | 0.7 | 0.2–2.9 | 1.8 | 0.8–4.4 |
| 696 | 0.8 | 0.3–1.9 | 1.8 | 0.7–4.2 |
| 804 | 0.9 | 0.1–2.3 | 0.3 | 0.0–0.7 |
| 900 | 1.0 | 0.3–3.1 | 0.3 | 0.0–1.1 |
| 1,200 | 0.8 | 0.2–1.8 | 0.3 | 0.1–0.9 |
| 1,500 | 1.0 | 0.2–1.9 | 0.3 | 0.1–0.8 |
| 1,800 | 1.1 | 0.3–2.5 | 0.3 | 0.1–0.9 |
| 2,100 | 1.0 | 0.3–2.4 | 0.3 | 0.1–1.2 |
| 2,400 | 0.8 | 0.2–2.2 | 0.3 | 0.1–1.7 |
Printed from https://ecosimarium.com/experiments/carrying-capacity/